BELIMO СM230/СM24
The SM series actuators with actuating torque 2 Nm are designed for controlling air dampers with cross section up to 0.4 m2 installed in various ventilation and air conditioning systems.
Application
The SM series actuators with actuating torque 2 Nm are designed for controlling air dampers with cross section up to 0.4 m2 installed in various ventilation and air conditioning systems.
Design
The actuator is installed directly on the damper axis and locked with a special spindle clamp to prevent its turning-through. The actuator overload protection stops the actuator once it reaches the end positions. In case of installation of a magnet on the actuator housing the gear is disengaged and the damper changes into manual operation mode. The turning angle is adjusted by mechanical end stops.
Control
The CM24A, CM230 models are controlled by the three-point control system. The damper is opened or closed by the single-circuit control.
Thank your for your time and your wish to improve our site.