FLEXIVENT: FLEXIBLE AND STURDY
FlexiVent air ducts are made of high-quality plastic using the co-extrusion technology which involves pressing two materials through the same die to produce a single piece.
Co-extruded plastic profiles have a number of advantages such as resistance to temperature changes, impact resistance and ease of care. The corrugations make semi-rigid air ducts highly flexible. This feature allows for easy bending at any point without any special tools or equipment.
The air ducts are rated for the maximum pressure of 8 kN/m2
A smooth inner surface of the air ducts makes cleaning easy
Easy to trim | Easy to trim |
AIR DUCT LAYING OPTIONS
Inside wooden floor structures through the beams | Embedded into the cement screed of the floor |
Inside the suspended ceiling space | Floor connector coverage with cement screed (combined with a heated floor system) |
The duct is fitted with a slip-on seal to retain air-tightness class C (available as an accessory). The lock ring (supplied) ensures reliable fixation of the air duct.
To prevent penetration of construction waste into the ducts during installation use a special duct plug.
- Catalogue "Semi channels FlexVent"
- Installation instruction "Semi-rigid air ducts FlexiVent"
- Semi-rigid air ducts Flexivent
- Typical solutions
- Installation. General view of the system
- Installation Connectors
- Installation. Air distribution boxes
- Installation Air throttling dampers
- Installation Plastivent
- Energy saving inline units FlexiVent