Applications
-
Innovative extract fan with stylish design for enhanced comfort level in shower rooms, bathrooms, kitchens and other residential premises.
-
Maximum air flow combined with low noise level provide the ideal microclimate.
-
Intermittent or continuous ventilation of bathrooms, shower rooms, kitchens and other utility spaces.
-
Mounting into ventilation shafts or connection to Ø 100 mm air ducts.
Design
-
The casing and the impeller are made of high-quality and durable UV-resistant plastic.
-
Due to its modern look the fan is compatible with any interior design.
-
Specially designed impeller aerodynamic profile provides high air capacity and low noise.
-
A shortened spigot for mounting into a ventilation shaft or direct connection to Ø 100 mm air duct.
-
The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulence, noise level and boost air pressure.
-
High ingress protection rating makes the fan the ideal bathroom ventilation solution. The electronic components are protected with tight covers.
-
The integrated thermal actuator enables smooth opening and closing of the front panel to prevent backdrafting.
Design features
Motor
-
The motor is equipped with a new energy efficient two-speed ball bearing motor with low energy demand.
-
Maintenance-free bearings contain enough grease for 40 000 hrs non-stop operation.
-
Motor on special anti-vibration dampers for vibration absorbing and silent operation.
-
Motor equipped with electric overheating protection.
Operation modes
Selection of the operation mode is performed via changeover of the switch as follows:
-
Operation mode 1: the fan is turned off by default. The fan switches to the low speed when the switch is closed or to the high speed when the humidity sensor is activated.
-
Operation mode 2: the fan is turned off by default. The fan switches to the high speed when the switch is closed or the humidity sensor is activated.
Control
Manual control:
-
Manual control with a room light switch. The switch is not included in the delivery set.
Automatic control:
-
By the timer T: the integrated turn-off delay timer keeps the fan running for the set time from 2 to 30 minutes after its shutdown with the switch.
-
By the humidity sensor and timer TH: if the humidity level in the room exceeds the set point adjustable within 60 to 90%, the fan turns automatically on and operates according to the timer settings, from 2 to 30 minutes.
Mounting example
