Vote

Please evaluate our updated site user friendliness

Keep up with us

RSS Subscribe to blog
Vents.TV

Blog messages

Go to blog

VENTS 100 F turbo

VENTS 100 F turbo

Maximum capacity - 128 m3/h.

Voltage / frequency:

OK

Products in this series  (5)

    • VENTS 100 F

      VENTS 100 F

      Maximum capacity - 98 m3/h.

      VENTS 125 F

      VENTS 125 F

      Maximum capacity - 185 m3/h.

      VENTS 125 F turbo

      VENTS 125 F turbo

      Maximum capacity - 232 m3/h.

      VENTS 100 F 12

      VENTS 100 F 12

      Maximum capacity - 86 m3/h.

      VENTS 125 F 12

      VENTS 125 F 12

      Maximum capacity - 165 m3/h.

    Add to a projectVENTS 100 F turbo
    Add to a projectVENTS 100 F L turbo
    • Timer
    • Back valve
    • Long-lasting BB (Ball Bearing) Motors
    • Pull-cord switch
    • More powerful motors
    • Humidity sensor
    • High pressure
    • Infrared sensor
    • Low voltage (12 V)
    • High-powered motor
    • Ventilation ducts

      Ventilation ducts

    • Supply and exhaust grilles and hoods

      Supply and exhaust grilles and hoods

    • Window flange FO series

      Window flange FO series

    • Clamps

      Clamps

    • Electrical accessories

      Electrical accessories

    • Connector with backdraft damper for round ducts

      Connector with backdraft damper for round ducts


    ParameterValueUnit
    Voltage
    220-240
    V
    Frequency
    50/60
    Hz
    Power
    16
    W
    Air capacity
    128
    75,392
    35,584
    0,03558
    2137,6
    m³/h
    CFM
    l/s
    m³/s
    l/m
    Current
    0.1
    A
    RPM
    2300
    min -1
    Sound pressure level at 3 m
    37
    [dBA]
    Weight
    0.72
    kg
    Protection rating
    IP 34
    class
    Spigot size
    100
    mm
    Engine Type
    220-240V / 50-60Hz
    VENTS 100 F turbo
    Sizes∅DBB1B2HH1LL1
    mm10018215216025222610413

    E-mail

    Please, feel free to contact us.

    support@vents.ua

    Phohe

    Customer service.

    +380 44 406 36 25

    Online form

    Send a message center customer support.


    By using this form you confirm that you have read and agree with the site condition and terms.
    Send
    • Selection method:
    • Performance:
    • Pressure:
    Duty point
    • Performance:- -
    • Pressure:- -
    • Power:- -
    • Recovery Efficiency:- -
    Wiring diagram for the fans equipped with a built-in switch Wiring diagram for the fans without built-in switch
    Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch
    Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.
    Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.
    Wiring diagram for the fans with grounding  
     

    * - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
    S, S1, S2 - external switches.

    Operating logic of the fans with optional equipment
    • The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
    • The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings.  The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
    • The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
    • Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.