VENTS - manufacture of ventilation and air conditioning systems

Vents 100 X star turbo

Maximum capacity - 116 m³/h.

Technical parameters

Parameter	Value		Unit
Parameter	Voltage	220-240		V
Frequency	50/60		Unit	Hz
Power	16		W
Air capacity	116 68,324 32,248 0,03225 1937,2		m³/h CFM l/s m³/s l/m
Current	0.1		A
RPM	2300		min ^-1
Sound pressure level at 3 m	36		[dBA]
Weight	0.69		kg
Protection rating	IP 24		class
Spigot size	100		mm
Engine Type	220-240V / 50-60Hz

Modifications and certificates

VENTS 100 X star turbo
VENTS 100 X star L turbo
VENTS 100 X star K turbo
VENTS 100 X star K L turbo

Timer
Back valve
Long-lasting BB (Ball Bearing) Motors
Pull-cord switch
More powerful motors
Humidity sensor
High pressure
Infrared sensor
Low voltage (12 V)
High-powered motor

Diagrams

Wiring

Wiring diagram for the fans equipped with a built-in switch	Wiring diagram for the fans without built-in switch

Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch	Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch

Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp.	Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.

Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp.	Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.

Wiring diagram for the fans with grounding

* - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
S, S1, S2 - external switches.

Operating logic of the fans with optional equipment

The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.

Sizes