Vote

Is our site helpful for your business development?

Keep up with us

RSS Subscribe to blog
Vents.TV

Blog messages

Go to blog

VENTS VUE/ VUT 100 P mini air handling units with heat recovery

VENTS VUE/ VUT 100 P mini air handling units with heat recovery

Air handling units with heat recovery in the compact sound- and heat-insulated casing. Air capacity up to 106 m3/h. Heat recovery efficiency from 64 up to 76%.

Products in this series (2)

  • VUE 100 P mini

    VUE 100 P mini

    VUT 100 P mini

    VUT 100 P mini

Series   Rated air capacity [m3/h]   Mounting type   Type
VENTS VUE
VENTS VUT
  100   P - suspended   mini
Description

Compact air supply and exhaust ventilation unit VUE 100 P mini/ VUT 100 P mini is a simple and effective energy-saving solution ventilation of apartments, cottages, singlefamily houses, workshops and trade premises.

The unit is a fully-featured ventilation unit that provides air cleaning, fresh air supply to the premise and removal of extract air from the premise. Extract air thermal energy is transferred to the cross-flow heat exchanger and is used to warm up the supply air flow. Built-in heat exchanger prevents heat losses and saves operating costs for heating in winter and air conditioning in summer.

Due to the compact casing and silent operation the VUE 100 P mini/ VUT 100 P mini unit can be installed behind suspended ceiling. The unit is designed for connection to Ø125 mm round air ducts. Several rooms may be ventilated if they are connected with air distribution network. Air flow regulation with A3 (P3-1-300) speed switch.

Casing

The casing is made of corrosion-resistant alumozink and sound-insulated with 15 mm сellular polyethylene layer. For easy mounting the casing is fitted with mounting brackets.

The detachable panel is swivel connected to the unit to provide fast and easy access to the casing internal components for servicing and maintenance. The unit is equipped with two backdraft dampers, one in the supply and the other in the exhaust air duct.

Filter

Supply and extract air flows are purified through two filters with filtering class G4. The filters prevent dirt and dust ingress into the room and protect the unit components against contaminations.

Fans

The unit is equipped with reliable supply and exhaust fans with forward curved blades that are powered by motors with low energy demand. The motor has maintenance-free ball bearings that ensure long service life about 40 000 hrs and are greased for the operation period.

Heat exchanger VENTS VUE 100 P mini

Cross-flow polymerized cellulose enthalpy heat exchanger with heat recovery efficiency from 64% up to 72% enables not only heat but humidity recovery and provides indoor humidity balance. In summer season the heat exchanger serves for intake air cooling down and drying and in winter season for warming up and moisturizing. Water vapour is extracted from wet extract air and is absorbed by the heat exchanging plates.

Absorbed heat and moisture are transferred to supply air flow. Supply and extract air flows are fully separated and no microbes and germs are transferred to supply air flow.

Heat exchanger VENTS VUT 100 P mini

The unit is equipped with a high-efficient crossflow plastic heat exсhanger and a drain pan for condensate drainage.

Operating logic

Warm extract air is moved by exhaust fan from the premise through the extract filter and heat exchanger, where it transfers thermal energy to its elements and then is exhausted outside.

Cold intake air from outside is moved by the supply fan first to the supply filter where it is purified, then to the heat exchanger where it absorbs thermal energy from extract air and then supplied to the room.

The heat exchanger reduces heat losses and saves operating costs for heating in winter and air conditioning in summer.

Control

Air capacity (speed) is regulated with A3 (P3-1-300) speed switch.

  • Low speed - 57 m3/h, 24 dBA
  • Medium speed - 78 m3/h, 32 dBA
  • Maximum speed - 106 m3/h, 41 dBA

The external speed switch is comfortable to use at any place.

Heat exchanger protection

For freeze protection at low temperatures the unit is equipped with a thermostat inside the casing that switches the supply fan off in case of freezing danger to let extract air warm up the heat exchanger.

Mounting

Due to the compact casing height the unit is designed for horizontal indoor installation behind suspended ceilings and connection to Ø125 mm round air ducts.

Mounting example

Mounting example of VENTS VUE 100 P mini in the flat

E-mail

Please, feel free to contact us.

support@vents.ua

Phohe

Customer service.

+380 44 406 36 25

Online form

Send a message center customer support.

By using this form you confirm that you have read and agree with the site condition and terms.
Send
  • SR series (round)

    SR series (round)

  • KOM series

    KOM series

  • SRF series

    SRF series

  • C series

    C series