Parameter | Value | Unit | |
---|---|---|---|
Power supply/ power consumption | 24 VAC (50/60 Hz ± 10%), 24 VDC/1.6 W Max | ||
Gas detection analyzer | Non-dispersive infrared detector (NDIR) with self-calibration system | ||
CO2 detection range | 0–2,000 ppm (parts per million) | ||
Accuracy at 25°С (77°F), 2000 ppm | ±30 ppm + 3 % of reading | ||
Response time | max. 2 min | ||
Warm up time for each turning-on | 2 hours (first time), 2 minutes (operation) | ||
Analogue output | 0-10 VDC (factory setting), 4-20 mA (selectable by jumpers) | ||
On/Off output | 1X2A switch load. Four set points selectable by jumpers | ||
Operating conditions/ storage recommendations | 0–50 °C; 0–95 % RH non condensing/0–50 °C | ||
Net weight/ Dimensions | 0.120 kg/100 mm х 80 mm х 30 mm |
Phohe
Customer service.
+380 44 406 36 25
Online form
Send a message center customer support.
Thank your for your time and your wish to improve our site.