Vote

How often do you use equipment selection program?

Vote

Keep up with us

ventilation.system
RSS Subscribe to blog
Vents.TV

Blog messages

16.11.2017
Autumn upgrades for VENTS factory equipment

Autumn upgrades for VENTS factory equipment

Go to blog

VENTS 100 S1 12

VENTS 100 S1 12
VENTS 100 S1 12
  • Front panel thickness.
  • 3d

Maximum capacity - 86 m3/h.

Show as:

Voltage / frequency:

OK

Products in this series  (19)

      VENTS 100 S

      VENTS 100 S1

      VENTS 125 S

      VENTS 125 S1

      VENTS 150 S

      VENTS 100 S turbo

      VENTS 100 S1 turbo

      VENTS 125 S turbo

      VENTS 125 S1 turbo

      VENTS 150 S turbo

      VENTS 100 S 12

      VENTS 125 S 12

      VENTS 125 S1 12

      VENTS 150 S 12

      VENTS 100 S (220/60)

      VENTS 125 S (220/60)

      VENTS 150 S (220/60)

      VENTS 100 S turbo (220/60)

      VENTS 125 S turbo (220/60)

      Technical parametersDiagramsSizesWiringAccessoriesDocumentationSupport
      • Ventilation ducts

        Ventilation ducts

      • Supply and exhaust grilles and hoods

        Supply and exhaust grilles and hoods

      • Back valve KO series

        Back valve KO series

      • Window flange FO series

        Window flange FO series

      • Clamps

        Clamps

      • Electrical accessories

        Electrical accessories

      • Connector with backdraft damper for round ducts

        Connector with backdraft damper for round ducts


      ParameterValueUnit
      Voltage
      12
      V
      Frequency
      50/60
      Hz
      Power
      14
      W
      Air capacity
      86
      50,654
      23,908
      0,02391
      1436,2
      m³/h
      CFM
      l/s
      m³/s
      l/m
      Current
      1.5
      A
      RPM
      2200
      min -1
      Sound pressure level at 3 m
      33
      [dBA]
      Weight
      0.58
      kg
      Protection rating
      IP 34
      class
      Spigot size
      100
      mm
      Engine Type
      12V / 50-60Hz
      VENTS 100 S1 12
      Sizes∅DBHLL1
      mm1001501209312

      E-mail

      Please, feel free to contact us.

      support@vents.ua

      Phohe

      Customer service.

      +380 44 406 36 25

      Online form

      Send a message center customer support.


      By using this form you confirm that you have read and agree with the site condition and terms.
      Send
      Download selectedDownload allMore downloads
      • Selection method:
      • Performance:
      • Pressure:
      Duty point
      • Performance:- -
      • Pressure:- -
      • Power:- -
      • Recovery Efficiency:- -
      Wiring diagram for the fans equipped with a built-in switch Wiring diagram for the fans without built-in switch
      Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch
      Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.
      Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.
      Wiring diagram for the fans with grounding  
       

      * - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
      S, S1, S2 - external switches.

      Operating logic of the fans with optional equipment
      • The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
      • The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings.  The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
      • The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
      • Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.