Login

Privacy Policy (GDPR)
I forgot my password
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use
Authorization
Menu
    Signup & Login
    EN
    About us

    VENTS NKD 250-1,2-1 A21

    VENTS NKD 250-1,2-1 A21
    VENTS NKD 250-1,2-1 A21
    • VENTS NKD 250-1,2-1 A21
    zoom
    • VENTS NKD 250-1,2-1 A21
    Print versionSave in PDF format
    Duct heater for supply air post-heating with external control.
    Connected air duct diameter – 250 mm.
    Heater power – 1.2 kW.
    Add to project
    Add to compare
    • Description
    • Characteristics
    • Capacity diagram
    • Downloads
    • Dimensions
    • Designation key
    • Compatibility table
    • Electric heater power selection diagram
    Description
    Description
    APPLICATION  
    • The heater is designed for integration into a ventilation system and joint operation with an air handling unit equipped with a control system used to switch on the heater and control its operation.
    • The heater maintains the supply duct air temperature at a point set by the unit controller.
    DESIGN  
    • The casing, the junction box and the heater cover are made of galvanized steel with the heating elements in stainless steel.
    • The heater casing is additionally heatinsulated with 20 mm non-flammable mineral wool layer.
    • The heaters are equipped with rubber seals for airtight connection to the air ducts.
    • The NKD duct heaters are equipped with a power and a signal cable for connection of the heater to the air handling unit controller.
    • The temperature is controlled by a triac power controller by means of switching the full load on and off.
    • Load commutation is carried out by the semiconductor device (triac).
    • The heaters are equipped with overheat thermostats:
      ⏵main overheat protection with automatic reset at +50 °C
      ⏵emergency overheat protection with manual reset at +90 °C
    MOUNTING  
    • The heater design ensures its mounting on the round ducts in any position by means of clamps (included in delivery).
    • The air flow direction shall match the direction of the arrow on the heater casing.
    • The heater is connected to the air handling unit controller using the cable with connectors.
    • In case of horizontal mounting the control box must be installed with the cover upwards.
    • Swivel range from the normal position up to max. 90°.
    • Do not install the control box with the cover downwards.
    Characteristics
    Characteristics
    Capacity diagram
    Capacity diagram
    Files archieve
    Downloads
    Dimensions
    Characteristics
    Designation key
    Designation key
    Compatibility table
    Compatibility table
    Electric heater power selection diagram
    Electric heater power selection diagram
    This site use cookies. By accepting cookies you can optimize your browsing experience. Please read our Privacy Policy for more information.
    Privacy Policy (GDPR)
    Close
    Share your opinion

    Questionnaire
    Is our site helpful for your business development?