Heat recovery air handling unit VENTS VUT 530 H

Description

DESCRIPTION

Air handling unit VUT H is a complete ventilation units designed for air filtration and supply to the premises and exhaust air removal.

CASING

The casing is made of aluminium profile, double skinned with 20 mm mineral wool heat-and sound-insulating layer.

FILTER

FANS

The unit is equipped with supply and exhaust centrifugal double-inlet fans with forward curved blades and built-in thermal overheating protection with automatic restart.

HEAT EXCHANGER

The cross-flow heat exchanger is made of polystyrene.
Whenever heat recovery is not required the heat exchanger block can be easily replaced by a «summer» block.
The unit is also equipped with the drain pan for condensate water drainage as well as built-in freezing protection system.

CONTROL

MOUNTING

Air handling unit is mounted on the floor and suspended to the ceiling by means of a seat angle with anti-vibration mounts or attached to a wall with brackets.

VUT H unit air exchange example in the flat

Characteristics

Parameter	VUT 530 H	Measurement unit
Phase	1	˜
Voltage	230	V
Frequency	50/60	Hz
Maximum fan power	2 pcs. x 150	W
Air capacity	530	m³/h
Fan current	2 pcs. x 0.66	A
Total unit current	1.32	A
Total unit power	300	W
RPM	1100	min^-1
Transported air temperature	-25...+40	°С
Sound pressure level at 3 m distance	28-47	dBА
Heating	without heating	-
Casing material	aluzinc	-
Insulation	25 mm mineral wool	-
Filter: extract	G4	-
Filter: supply	G4	-
Connected air duct size	160	mm
Heat recovery efficiency	up to 88	%
Weight	49	kg
Heat exchanger type	cross-flow	-
Heat exchanger material	polystyrene	-
SEC Class	E	-
Type	supply and exhaust with heat recovery	-
Mounting	floor mounting, wall mounting, ceiling mounting	-

Capacity diagram

Files archieve

Downloads

Dimensions

Characteristics

Additional technical data

Designation key

Accessories

Series	Rated air flow [m³/h]	Duct connection
VENTS VUT	350; 500; 530; 600; 1000; 2000	H: horizontal