Domestic fans 
Industrial and commercial fans 
Single-room ventilation systems with heat recovery 
Air handling units 
Air heating systems 
Smoke extraction and ventilation 
Air sterilizers 
Accessories for ventilating systems 
Electrical accessories 
Ventilation ducts and fittings 
Air distribution components 
Ventilation kits and vents VENTS SRP series
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems.
- VENTS SRP 120/600VENTS SRP 120/750VENTS SRP 120/900
- VENTS SRP 120/1200VENTS SRP 120/1500VENTS SRP 120/2000
- VENTS SRP 120/500VENTS SRP 100/500VENTS SRP 100/600
- VENTS SRP 100/750VENTS SRP 100/900VENTS SRP 100/1200
- VENTS SRP 100/1500VENTS SRP 100/2000VENTS SRP 125/500
- SRP 125/600VENTS SRP 125/750VENTS SRP 125/900
- VENTS SRP 125/1200VENTS SRP 125/1500VENTS SRP 125/2000
- VENTS SRP 150/500VENTS SRP 150/600VENTS SRP 150/750
- VENTS SRP 150/900VENTS SRP 150/1200VENTS SRP 150/1500
- VENTS SRP 150/2000VENTS SRP 160/500VENTS SRP 160/600
- VENTS SRP 160/750VENTS SRP 160/900VENTS SRP 160/1200
- VENTS SRP 160/1500VENTS SRP 160/2000VENTS SRP 200/500
- VENTS SRP 200/600VENTS SRP 200/750VENTS SRP 200/900
- SRP 200/1200VENTS SRP 200/1500VENTS SRP 200/2000
- VENTS SRP 250/500VENTS SRP 250/600VENTS SRP 250/750
- VENTS SRP 250/900VENTS SRP 250/1200VENTS SRP 250/1500
- VENTS SRP 250/2000VENTS SRP 315/500VENTS SRP 315/600
- VENTS SRP 315/750VENTS SRP 315/900VENTS SRP 315/1200
- VENTS SRP 315/1500VENTS SRP 315/2000
- Description
- Modifications
- Downloads
- Designation key
| APPLICATIONS | DESIGN |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems. Suitable for installation into round ducts. The silencer reduces the noise level in the air duct significantly. The silencer is applied jointly with the sound-insulated fan in case of high level requirements not only to the air duct but to the equipment altogether. |
SRP silencer consists of internal flexible air duct made of micro-perforated aluminum foil and laminated with polyether film. The ducts are reinforced by the scroll frame made of high-carbon steel wire and outer polyethylene sleeve. Silencer supplied with high quality 25 mm sound insulation material. The silencer is equipped with the connecting flanges with rubber sealing that provides the airtight connection to the air ducts. Each standards size has several length modifications.
|
| MOUNTING | |
|
The silencer design allows fixing it on the round ducts in any position by means of clamps. Installation in series is preferable to attain the better effect. To prevent the flexible silencer sagging it should be fixed not only at the ends but in the middle as well. |
- Advertising and printing products
-
-
- Certificates
-
-
-
- Technical documentation
-
-
-
-
| Series | Air duct diameter [mm] | / | Length |
| SRP | 100; 120; 125; 150; 160; 200; 250; 315 | 500; 600; 750; 900; 1200; 1500; 2000 |
