VENTS Z star series
Axial fans with a stainless steel front panel for exhaust ventilation with the capacity up to 358 m3/h. Different types of drawings of the front panel. VENTS Z Star Series fans are equipped with a built-in LED lighting. Compatible with 100, 125 and 150 mm air ducts.
Voltage / frequency: |
Products in this series (14)
CE mark means that the equipment is produced in compliance with the quality and safety standards provided by EU regulations for the given product type (marked by manufacturer). | |
Mark of conformity to the European Quality Standards and Electrical Safety issued by Association for Technical Inspection (Technischer Überwachungsverein, Germany). | |
Mark of conformity of the goods subject to obligatory certification in DSTR system as well as technical norms and standards acting in Russian Federation. Confirmed by the RosTEST certificates (Moscow). | |
Mark of conformity to the Ukrainian Quality Standards and electrical safety issued by UkrTEST. | |
Mark of conformity to the Polish Quality Standards and electrical safety issued by PCBC (Polish center for testing and certification). | |
Mark of conformity to the Slovak Quality Standards and electrical safety issued by EVPU (Slovakia). | |
Insulation class: double insulation. | |
Applicance protection class. |
Picture symbol | Designation | Modification description | ||
---|---|---|---|---|
Z star К | Fan is equipped with a backdraft damper for back flow preventing. | |||
Z star L | The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period. | |||
Z star turbo | High-powered motor. | |||
Z star 12 | Modification with low-voltage motor. 12 V AC power supply. | |||
Z star T* | Equipped with a regulated timer with the operating time from 2 to 30 minutes. Only for 100 mm fans. | |||
Z star TH* | Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%. Only for 100 mm fans . |
* only for Ø 100 mm fans
Applications
- Continuous or periodic air extraction of bathroom, showers, kitchens and other utility spaces.
- Ventilation shaft mounting or duct connection.
- Delivery of low and medium intensity air flow to small distances over a low-resistance ventilation system.
- Compatible with 100, 125 and 150 mm ducting.
Design
- The polished steel front panel with various ornamental modifications.
|
|
- The polished steel front panel with various ornamental modifications.
- Modern design and aesthetic look.
- The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
- The intellectual impeller design makes the fan efficiency high and the service life long.
- Protection rating IP 24.
Motor
- Reliable and energy-efficient electric motor.
- Intended for continuous operation and maintenance-free.
- Equipped with integral overheating protection.
Front panel modifications
| |||||
Z star 1 | Z star 2 | Z star 3 | Z star 4 | Z star 5 | Z star 6 |
Control
Manual:
- The fan is controlled by a room light switch. It is not included in the delivery package.
- Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.
Automatic:
- By means of electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
- By means of timer T (the built-in shutdown delay timer enables fan operation for additional 2 to 30 minutes after switching off).
- By means of the humidity sensor and timer TH (if the room humidity exceeds the sensor threshold adjustable within 60-90% the fan will switch on automatically and operate until the humidity level reverts to normal; the fan will run as pre-programmed and shut down).
Mounting
- The fan is mounted directly into the ventilation shaft opening.
- If the ventilation shaft remoteness prevents direct installation flexible ducts may be used. The ducts are coupled with the fan outlet flange by means of a clamp.
- Fixed to the wall on self-tapping screws.
- For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
Mounting example
Phohe
Customer service.
+380 44 406 36 25
Online form
Send a message center customer support.
- Selection method:
- Performance:
- Pressure:
Thank your for your time and your wish to improve our site.