Sound-insulated fan VENTS KSB 355 K2 EC

Description
Characteristics
Capacity diagram
Downloads
Dimensions
Additional characteristics
Designation key

Description

APPLICATION
The KSB K2 EC fans are designed for supply and exhaust ventilation systems for commercial, office and other public or industrial premises with high requirements to noise level and with limited space for mounting.	For example, the unit design includes a possibility of space-restricted installation above suspended ceilings. Compatible with Ø 100-500 mm air ducts.
DESIGN
The fan casing is made of aluzinc. For easy installation and operation, the cover of the fan is secured with a special lock. The casing is heat- and sound-insulated with a 50 mm layer of non-flammable mineral wool. To ensure better noise absorption, the inner surface of the insulation is made of a perforated metal sheet. The round connecting spigots are rubber sealed.
MOTOR
The units feature efficient electronically commutated (EC) direct current motors with an external rotor and centrifugal impellers with backward curved blades. EC motor is free of friction and wear parts such as a commutator and brushes. These components are replaced by a maintenance-free electronic circuit board.	EC motors are characterised with high performance and optimum control across the entire speed range. In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.
INTEGRATED FUNCTIONS AND CONTROL
The fan is controlled with an external control signal 0-10 V (capacity control is performed depending on temperature, pressure, smoke level etc.). The fan has low energy consumption at any speed.	Maximum fan speed does not depend on the available current frequency and is suitable for operation both at 50 and 60 Hz. The fans can be connected to centralized computer ventilation control systems.
INSTALLATION
Duct fans are intended for mounting to round air ducts. The fans are installed between the air ducts. In case the fan is mounted on flexible joints, attach the fan to a structural unit by means of supports, suspension links or brackets.	The fan may be installed in any position in consideration of the air flow direction (as indicated by the arrow on the fan casing). While mounting the fan provide enough access for servicing and repair operations.

Characteristics

Parameter	KSB 355 K2 EC	Measurement unit
Phase	1	˜
Voltage	230	V
Power consumption	527	W
Current	2.31	A
Frequency	50/60	Hz
Sound pressure level at 3 m distance	50	dBА
Maximum air capacity	3417	m³/h
RPM	2360	min^-1
Protection rating	IP X4	-
Duct diameter	355	mm
EC motor	yes	-
Design	centrifugal	-
Casing material	aluzinc	-
Weight	47	kg
SEC Class	-	-
Outdoor mounting	no	-
Sound-insulated casing	yes	-
Duct	for round air ducts	-
Type	supply and exhaust	-
Mounting	Inline	-

Capacity diagram

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit
Ø D	354	mm
B	807	mm
B1	600	mm
B2	904	mm
L1	818	mm
H	505	mm
L2	737	mm

Additional characteristics

Designation key

Sound power level [A-filter]											Sound pressure level at a distance of 3 m [A-filter]	Sound pressure level at a distance of 1 m [A-filter]
Sound power level		Gen.	Octave frequency band [Hz]								Sound pressure level at a distance of 3 m [A-filter]	Sound pressure level at a distance of 1 m [A-filter]
	Hz	Gen.	63	125	250	500	1000	2000	4000	8000	LpA, 3 m dBA	LpA, 1 m dBA
L_wA to inlet	dBA	89	82	85	84	80	72	68	66	64	69	79
L_wA to outlet	dBA	91	81	81	80	84	82	84	81	77	70	80
L_wA to environment	dBA	70	57	58	69	60	53	55	54	55	50	60

Series	Duct diameter	Modification	Motor	Options
VENTS KSB	100; 125; 150; 160; 200; 250; 315; 355; 400; 450; 500	К2: heat- and sound-insulated casing	ЕС: synchronous electronically commutated motor	R1: power cord with a mains plug