Electric actuator VENTS LM24A | official VENTS website

Description

APPLICATION

The SM series actuators with actuating torque 5 Nm are designed for controlling air dampers with cross section up to 1 m² installed in various ventilation and air conditioning systems.

CONTROL

The LM24A, LM230A models are controlled by the three-point control system.
The damper is opened or closed by the single-circuit control.

DESIGN

The actuator is installed directly on the damper axis and locked with a special spindle clamp to prevent its turning-through.
The actuator overload protection stops the actuator once it reaches the end positions.
In case of pressing the button on the actuator housing the gear is disengaged and the damper changes into manual operation mode.
The turning angle is adjusted by mechanical end stops.

Characteristics

Parameter	LM24A	Measurement unit
Voltage	24 AC 50/60 Hz, 24 DC~	-
Nominal voltage range	19.2...28.8 AC 19.2...28.8 DC	V
Rated power	2	VA
Power consumption	1	W
Feedback potentiometer	integrated 5 kOhm ± 5 %	-
Connecting cable	1 m long, 3 x 0.75 mm²	-
Mechanical control	self-resetting button	-
Rotation direction	selected by 0/1 switch positioning	-
Torque	5 (at nominal voltage)	Nm
Rotation angle	max. 95°, adjustable with mechanical end stops	-
Running time	150 s	-
Position indicator	mechanical	-
Ingress protection	IP54 at any mounting position	-
Electrical protection class	III low voltage II totally insulated	-
Operation temperature	-30...+50	°С
Storage temperature	-40…+80	°С
Ambient humidity	95 %, no condensation	-
Noise level	35	dBА
Maintenance	not required	-
Mass	0.6	kg

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit

Wiring diagram

Overall dimensions

BELIMO LМ24A