Login

Privacy Policy (GDPR)
I forgot my password
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use
Authorization
Menu
    Signup & Login
    EN
    About us

    VENTS NKP 315-2,0-1 A21 V.2

    VENTS NKP 315-2,0-1 A21 V.2
    VENTS NKP 315-2,0-1 A21 V.2
    • VENTS NKP 315-2,0-1 A21 V.2
    zoom
    • VENTS NKP 315-2,0-1 A21 V.2
    Print versionSave in PDF format
    Heater for heat exchanger freeze protection.
    Connected air duct diameter – 315 mm.
    Heater power – 2.0 kW.
    Add to project
    Add to compare
    • Description
    • Characteristics
    • Capacity diagram
    • Downloads
    • Dimensions
    • Designation key
    • Compatibility table
    • Electric heater power selection diagram
    Description
    Description
    APPLICATION  
    • Duct electric heater for heat exchanger freeze protection by means of supply air preheating and supply air duct temperature maintaining at a point that ensures heat exchanger freezing protection.
    • Compatible with round Ø125, 150, 160, 200, 250 and 315 mm air ducts.
    DESIGN  
    • The casing and the control box are made of galvanized steel and the heating elements are made of stainless steel.
    • The heater casing is extra heat insulated with 20 mm non-flammable mineral wool layer.
    • The heater spigots are rubber sealed for airtight connection to the air ducts.
    • The NKP A21 V.2 duct heaters are equipped with a power cable and a control cable for connection to a controller of an air handling unit.
    • Air temperature is controlled with a triac power controller that switches the maximum load on/off.
    • Load is commutated with a semiconductor (triac).
    • The heaters are equipped with overheat protection thermostats:
      ⏵self-resetting overheat protection thermostat actuated at +60 °C.
      ⏵emergency overheat protection thermostat actuated at +90 °C.
    MOUNTING  
    • The heater design ensures its connection to round air ducts by means of the clamps from the delivery set.
    • The arrow on the heater casing must match the air flow direction in the system.
    • The heater is controlled by the ventilation unit through the cable supplied and already connected to the heater at the factory.
    • The control box cover must be directed upwards with the maximum deviation angle 90°.
    • The control box cover must not be directed downwards.
    Characteristics
    Characteristics
    Capacity diagram
    Capacity diagram
    Files archieve
    Downloads
    Dimensions
    Characteristics
    Designation key
    Designation key
    Compatibility table
    Compatibility table
    Electric heater power selection diagram
    Electric heater power selection diagram
    Similar products
    This site use cookies. By accepting cookies you can optimize your browsing experience. Please read our Privacy Policy for more information.
    Privacy Policy (GDPR)
    Close
    Share your opinion

    Questionnaire
    Where have you learned about us?