Login

Privacy Policy (GDPR)
I forgot my password
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use
Authorization
Menu
    Signup & Login
    EN
    About us

    VENTS VPA 150-6,0-3

    VENTS VPA 150-6,0-3
    VENTS VPA 150-6,0-3
    • VENTS VPA 150-6,0-3
    zoom
    • VENTS VPA 150-6,0-3
    Print versionSave in PDF format
    Supply unit with the air flow up to 425 m³/h in the compact sound- and heat-insulated casing with electric heater.
    Add to project
    Add to compare
    • Description
    • Characteristics
    • Downloads
    • Dimensions
    • Additional characteristics
    • Designation key
    • Accessories
    Description
    Description
    DESCRIPTION CASING
    • The fan unit provides filtration, heating and supply of fresh air to premises with the air flow from 200 up to 1500 m³/h.
    • The casing is made of aluzinc with internal heat- and sound-insulating 25 mm layer of mineral wool.
    FILTER HEATER
    • Integrated panel G4 filter ensures sufficient supply air purification.
    • Electric heating battery is designed for supply air heating during winter and off-season time.
    FAN
    • Centrifugal fan with backward curved blades and built-in overheating thermostat with automatic restart.
    • The motor ball bearings are maintenance-free and are designed for at least 40 000 hours service life.
    CONTROL AND AUTOMATION
    • Integrated control and automation system for air flow control and setting supply air temperature.
    • The unit may be controlled from the external control panel fixed on 10 m wire delivered as a standard.
    CONTROL AND PROTECTION FUNCTIONS
    • switching the unit on/off;
    • maintaining supply air temperature set from the control panel by means of triac heating capacity regulation;
    • fan speed control by means of the control panel (3 speed modes);
    • working-out of the required patterns during the unit switching on and off;
    • the unit daily or week timer operation;
    • active overheating protection of heating elements;
    • disabling electric air heating battery operation when the motor is not running;
    • electric heater overheating protection by means of two thermostats;
    • filter clogging control though the differential pressure sensor;
    • actuating the air damper;
    • relay input from an external sensor (humidistat, CO2 sensor, motion sensor) to switch the fan to maximum speed;
    • input for alarm fire fighting signal.
    MOUNTING
    • Air supply unit can be mounted on the floor, attached to a ceiling with a seat angle with anti-vibration mounts or attached to a wall by means of the brackets.
    • The unit can be mounted either in service spaces (balcony, storage room, underground floor, roof space etc.) or in the main space by placing the unit above the suspended ceiling or in the pocket.
    • The unit can be mounted in any position except for the vertical one with vertical air downstream because tubular heating elements are not allowed under the fan.
    • Free access to the unit shall be provided for maintenance and filter cleaning.
    • The service panel is placed on the top.
    • The control block is on the right.
    Characteristics
    Characteristics
    Files archieve
    Downloads
    Dimensions
    Characteristics
    Additional characteristics
    Additional characteristics
    Designation key
    Designation key
    Accessories
    Accessories
    Accessories Similar products
    This site use cookies. By accepting cookies you can optimize your browsing experience. Please read our Privacy Policy for more information.
    Privacy Policy (GDPR)
    Close
    Share your opinion

    Questionnaire
    Is our site helpful for your business development?